** Click on the small pictures to see LARGE pictures!!
Later Style Latching
6.3mm Connectors
Note 1: Due to my supplier, I can no longer get
the black connectors. Regardless of picture connector color, if
you order these connectors, you will receive WHITE connectors!
White Single pin connector housings
Part# PLF1P6.3W
Qty.: 1 $2.95 (Pair: Both Male and Female connector housings with
brass terminals)
Part# FLF1P6.3W
Qty. 1 $1.55 ( Only Female connector housing with brass terminal)
Note: This connector fits the
Troll Hole distributor, the Toyota Gear Reduction Starter, the Troll
Hole carb idle solenoid connector and the City Racer Carb idle solenoid
connector.
FLF1P6.3W Fits this starter
only!
FLF1P6.3W
Also fits the TrollHole or City Racer Carb Connector!
Part# MLF1P6.3W
Qty. 1 $1.55 (Only Male connector housing with brass terminal) mates
with FLF1P6.3W above.
__________________________________________________________________________________
WHITE
2 pin latching connector housings
Part# PLF2P6.3W
Qty. 1 $3.19 (PAIR: Both Male and Female connector housings with
4 brass terminals, 2 male and 2 female)
Part# FLF2P6.3W
Qty.: 1 $1.85 ( Only Female connector housing with 2 brass female
terminals)
Part# MLF2P6.3W
Qty.: 1 $1.85 (Only Male connector housing with 2 brass male terminals)
WHITE 3 pin latching connectors
Part# PLF3P6.3W
Qty. 1 $3.49 (Connector Pair:
Both Male and Female connector housings with 6 brass terminals,
3 male and 3 female)
Part# FLF3P6.3W
Qty. 1 $2.55 ( Only Female connector housing with
3 brass female terminals) Note: Used as alternator connector on
FJ40's.
Part# MLF3P6.3W Qty.
1 $2.25 ( Only Male
latching connector housing with 3 brass male terminals)
WHITE
4 pin latching connector housing
Part# PLF4P6.3W
Qty. 1 $3.89 (Both Male and
Female connector housings with
8 brass terminals, 4 male and 4 female)
Part# FLF4P6.3W
Qty. 1 $2.25 (Only Female connector housing with
4 brass female terminals)
Part# MLF4P6.3W
Qty. 1 $2.55 (Only Male connector housing with 4
brass male terminals)
WHITE
6 pin latching connector housing OUT
OF STOCK!!! No idea when I can get more!
Part# PLF6P6.3W Qty.
1 $4.25 (Both Male and Female connector housings with
12 brass terminals, 6 male and 6 female)
Part# FLF6P6.3W
Qty. 1 $2.55 (Only Female connector housing with
6 brass female terminals)
Part# MLF6P6.3W
Qty. 1 $2.75 (Only Male connector housing with 6
brass male terminals)
WHITE
8 pin latching connector housing
Part# PLF8P6.3W Qty.
1 $4.75 (Both Male and Female connector housings with
12 brass terminals, 8 male and 8female)
Part# FLF8P6.3W
Qty. 1 $3.55 (Only Female connector housing with
8 brass female terminals)
Part# MLF8P6.3W
Qty. 1 $3.55 (Only Male connector housing with 8
brass male terminals)
Green 6 pin latching male connector housing
Part# FLM6P3.0 Qty.
1 $6.95 (Includes 1 Male Connector housing, 1 rubber wire boot,
1 silicone seal, 6 male terminals)
This odd sealed MALE connector is
used on the late 70's rear brake/park/turn light housings, the regulator
connector(regulator side), and the rear chassis harness where it
plugs into the main cowl harness.
Part# MT3.0
Qty. 1 $0.75 Male terminal for
Part # FLM6P3.0
Part# FT3.0
Qty. 1 $0.75 Female terminal
fits the late model female connector housings shown below: If you
have a rear harness harness with these type plugs you can now rebuild
your rear harnesss! Note: I do NOT have the female housings for
these terminals... I am looking hard for them!
This female terminal fits the following connector
housings:
The regulator, rear chassis harness,
Cooling Fan Timer module, and the Early Emissions Computer.
Again I do NOT have ANY of these female connector housings, just
the female terminals!!!
NEW!
White 2 pin female non-latching 7.8mm Connector
housing
Part# F2P7.8
Qty. 1 $3.95 2 pin non-latching
female connector and two 7.8mm female terminals
This odd connector is used on the BJ40 starter solenoid
and fusible links.
White 2 pin male non-latching 7.8mm Connector housing
Part# F2P7.8
Qty. 1 $2.95 2 pin non-latching
male connector and two 7.8mm female terminals
This odd connector is used on the BJ40 fusible links.
|